Advance Course (G) “Camerabot” カメラボ #day3

【day 3】

<Parts you will use> Rotating base part

  • 2 x Beam with 1 pochi
  • 3 x Beam with 2 pochi
  • 5 x Beam with 4 pochi
  • 5 x Beam with 6 pochi
  • 4 x Beam with 8 pochi
  • 1 x Shaft beam with 2 pochi
  • 1 x Thin pinion gear
  • 1 x Large tire
  • 1 x Large tire(Wheel only)
  • 1 x Shaft with 2.5 pochi
  • 2 x Shaft with 8 pochi
  • 3 x Washer
  • 1 x Motor
  • 1 x Thin plate with 2 pochi
  • 3 x Thin plate with 4 pochi
  • 6 x Thin plate with 6 pochi
  • 5 x Thick plate with 4 pochi
  • 5 x Thick plate with 6 pochi
  • 2 x Thick plate with 8 pochi
  • 1 x Large plate
  • 1 x Rod with 15 holes
  • 8 x Small peg
  • 3 x Large peg
  • 2 x Shaft peg
  • 2 x Cross joint
  • 6 x Bush

<Parts you will use>
Rotation center base part

  • 4 x Beam with 4 pochi
  • 4 x Beam with 8 pochi
  • 4 x Rod with 9 holes
  • 1 x Rod with 15 holes
  • 4 x Small tire
  • 1 x Thin plate with 1 pochi
  • 5 x Large plate
  • 2 x Large gear
  • 1 x Washer
  • 4 x Shaft with 3 pochi
  • 1 x Shaft with 8 pochi
  • 10 x Small peg
  • 4 x Crank